__36170.1702568745.jpg?c=1 "NE-4100 Series")
__99669.1702568745.jpg?c=1 "NE-4100 Series")
__04839.1702568746.jpg?c=1 "NE-4100 Series")
__41537.1713909252.jpg?c=1 "Image of NE-4100 Series")
__13717.1713909252.jpg?c=1 "Image of NE-4100 Series")
__45980.1713909252.jpg?c=1 "Image of NE-4100 Series")
MOXA NE-4100 Series
10/100 Mbps embedded serial device servers
Datasheet
Features and Benefits
- 10/100 Mbps Ethernet interface
- Supports baudrates up to 230.4 kbps
- Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
- Supports DHCP, BootP, Static IP, and ARP
- SNMP and email alerts for event trapping and notifications
- Half the size of a credit card—only 57 × 40 mm
- Low power consumption at 1.5 W, with single +5 V input
VIEW MORE
Overview
Specifications
Accessories
Models
Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.
SNMP and Email Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or email under the following conditions:
-
Cold/warm start
-
Password authentication failure
-
Change in DSR/DCD line signal
-
Change in IP address
-
Change in password
Related Products
