__11555.1699306986.jpg?c=1 "EDR-8010 Series")
__27485.1713909383.jpg?c=1 "Image of EDR-8010 Series")
MOXA EDR-8010 Series
8 FE copper and 2 GbE SFP multiport industrial secure routers
Datasheet
Features and Benefits
- 8 FE + 2 Gigabit port all-in-one firewall/NAT/VPN/router/switch
- Visualize OT security with the MXsecurity management software
- Secure remote access tunnel with VPN
- Examine industrial protocol data with Deep Packet Inspection (DPI) technology
- Easy network setup with Network Address Translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- Security features based on IEC 62443/NERC CIP
- Supports secure boot for checking system integrity
- -40 to 75°C operating temperature range (-T model)
VIEW MORE
Overview
Specifications
Accessories
Models
Introduction
The EDR-8010 Series is a set ofhighly integrated industrial multi-port secure routers with firewall/NAT/VPNand managed Layer 2 switch functions. These devices are designedfor Ethernet-based security applications in critical remote controlor monitoring networks. These secure routers provide an electronicsecurity perimeter to protect critical cyber assets including substationsin power applications, pump-and-treat systems in water stations, distributedcontrol systems in oil and gas applications, and PLC/SCADA systemsin factory automation.
Defend Against Malicious Threats With Advanced Cybersecurity Features
The EDR-8010 Series’ embedded firewall uses policy rulesto control network traffic between trusted zones while Network AddressTranslation (NAT) shields the internal network from unauthorized accessby outside hosts. The Virtual Private Networking (VPN) functionalityfurther provides users with secure communication tunnels when accessingthe private network from the public Internet. To help protect yourOT assets from cyberattacks, the EDR-8010 Series supports Deep PacketInspection (DPI) to examine the data portion of network packets forvarious OT-specific protocols.
Simplify Configurations With the User-friendly Interface and QuickSettings
The EDR-8010 Series’ Setup Wizard provides an easy wayfor users to set up WAN, LAN, and Bridge ports for routing functionalityin just four steps. In addition, the object-based firewall managementfeature gives engineers a simple way to configure and maintain firewallfiltering for IP addresses and subnets, network services, industrialapplication services, and user-defined services.
Industrial-gradeDesign to Ensure Uninterrupted Network Connectivity
The EDR-8010Series’ rugged hardware makes these secure routers ideal for harshindustrial environments, featuring wide-temperature models that arebuilt to operate reliably in hazardous conditions and extreme temperaturesof -40 up to 75°C. Moreover, the EDR-8010 Series supports comprehensiveLayer 2 and Layer 3 redundancy mechanisms to ensure that your networkstays connected at all times.
Related Products
