NPort 5650-8-DT-T

MOXA NPort 5650-8-DT-T

NPort 5600-DT Series
8 port desktop mode device server, 3 in 1, DB9 male, 12-48VDC, -40 to 75°C
Image of NPort 5650-8-DT-T
Free Ground Shipping over $99 or Free 2-Day Shipping over $499 on U.S. Orders! $1,184.31 ON BACKORDER Estimated Availability: 08/05/2025

Please contact us via sales@neteon.net or 888-908-3330 for other product options.

ADD TO CART
Call Us 1-888-908-3330 for Availability or Possible Alternatives

Features and Benefits

moxa-nport-5600-dt-series-datasheet-v2.1.pdf
  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel
  • Configure by Telnet, web browser, or Windows utility
  • Socket modes: TCP server, TCP client, UDP, Real COM
  • SNMP MIB-II for network management
View More
Overview Specifications Accessories

Introduction

NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications

The NPort 5650-8-DT device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade Wiring

The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

Appearance
Collapse All -
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
2
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
Configuration Options
Windows Utility
Management
UDP
Filter
IGMP v1/v2
Windows Real COM Drivers
Windows Embedded CE 6.0/5.0, Windows XP Embedded
Linux Real TTY Drivers
Kernel versions 6.x, 5.x, 4.x, 3.x, 2.6.x, and 2.4.x
Fixed TTY Drivers
SCO UNIX, SCO OpenServer, SCO UnixWare 7, Sun Solaris 10, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Arm®-based Platform Support
Linux Kernel 5.x/4.x
Virtual Machine
Parallels Desktop (Windows on macOS 10.12 to 11.x)
Android API
Android 3.1.x and later
Time Management
SNTP
MIB
RFC1213, RFC1317
Security Functions
Authentication
Local database
Encryption
SHA-256
Security Protocols
SNMPv3
Serial Interface
Connector
NPort 5610-8-DT models/NPort 5650-8-DT models/NPort 5650I-8-DT models
No. of Ports
8
Serial Standards
NPort 5650-8-DT Models: RS-232/422/485
Baudrate
Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
XON/XOFF
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485
120 ohms
RS-485 Data Direction Control
Automatic Data Direction Control (ADDC)
Isolation
-I models: 2 kV
Surge
0.5 kV
Console Port
RS-232 (TxD, RxD, GND), 3-pin (19200, n, 8, 1)
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Power Parameters
Input Current
1066 mA @ 12 VDC
No. of Power Inputs
2
Input Voltage
12 to 48 VDC
Reverse Polarity Protection
Supported
Source of Input Power
TB, Power input jack
Reliability
Automatic Reboot Trigger
Built-in WDT
Alert Tools
Built-in buzzer and RTC (real-time clock)
Physical Characteristics
Housing
Metal
Installation
Wall mounting (with optional kit)
Dimensions (with ears)
229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)
Dimensions (without ears)
197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
Dimensions (with DIN-rail kit on bottom panel)
197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)
Weight
NPort 5650I-8-DT-T: 1,410 g (3.11 lb)
Interactive Interface
Push buttons for configuration (standard temp. models only)
Environmental Limits
Operating Temperature
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-11
Safety
IEC 62368-1
Declaration
Green Product
RoHS, CRoHS, WEEE
MTBF
Time
836,374 hrs
Standards
Telcordia (Bellcore) Standard
Warranty
Warranty Period
5 years
Details
See