Recently added item(s) ×

You have no items in your shopping cart.

Moxa TCF-142-S-ST-T

RS-232/422/485 to Fiber Optic Converter. ST Single-mode, -40 to 75°C

RS-232/422/485 to Fiber Optic Converter. ST Single-mode, -40 to 75°C

Brand: Moxa

Mfg P/N: TCF-142-S-ST-T

Price: $649.00

Qty:

  • Free Ground Shipping
  • Free 30 Days Return
Features

Features and Benefits

  •  “Ring” and “Point- to-Point” transmission
  • Extends RS-232/422/485 transmission up to:
    • 40 km with single-mode—TCF-142-S 
    • 5 km with multi-mode—TCF-142-M
  • Decreases signal interference
  • Protects against electrical interference and chemical corrosion
  • Supports baudrates up to 921.6 kbps
  • Wide temperature range models available (-40 to 75°C) 

Introduction

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.

Automatic Baudrate Detection

The TCF-142 converters can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.

 

Ring Operation

The TCF-142 converters can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.

 

Automatic Data Direction Control (ADDC®)

ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.

Accessories

Optional Power Supply

Universal AC (100 to 240V) Power Supply to 24VDC, Terminal Block

SKU: AC24VT

$18.00
Qty

20W/24V, Industrial Slim Fit DIN Rail Power Supply

SKU: CP-MDR-02024

$45.00
Qty

40W/24V, Industrial Slim Fit DIN Rail Power Supply

SKU: CP-MDR-04024

$49.00
Qty

60W/24V, Industrial Slim Fit DIN Rail Power Supply

SKU: CP-MDR-06024

$59.00
Qty

100W/24V, Industrial Slim Fit DIN Rail Power Supply

SKU: CP-MDR-10024

$92.00
Qty

Optional Mounting

35 mm DIN-Rail Kit with 4 screws

SKU: DIN-Rail-Kit

$4.00
Qty

1 meter (39 inches) 35 mm Steel Din-Rail Track.

SKU: Din-Rail Track (39)

$15.00
Qty

30 cm (12 inches) 35 mm Steel Din-Rail Track.

SKU: Din-Rail Track (12)

$8.00
Qty