Moxa NPort S8458-4S-SC-T
4 RS-232/422/485 ports, 4 10/100M Ethernet ports, 4 100M single-mode fiber ports with SC connector, 12-48VDC, -40 to 85℃ operating temperature
Features and Benefits
4-port RS-232/422/485 serial device server
- Serial QoS for confi guring serial data transmission priority
8-port managed Ethernet switch built in
- 10/100BaseT(X)(RJ45 connector), 100BaseFX(single-mode SC connector)
- Ethernet redundancy with Turbo Ring and Turbo Chain (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D) supported
- QoS, IGMP-snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supported
- Surge protection for serial, power, and Ethernet
The NPort® S8458 series combines an industrial device server with a full-function managed Ethernet switch by integrating 4 fiber ports, 4 Ethernet ports, and 4 RS-232/422/485 serial ports, allowing you to easily install, manage, and maintain the product. Combining a device server and switch in one product allows you to save space in your cabinet, reduce overall power consumption, and reduce costs, since you will not need to purchase a switch and serial device server separately.
Supports the Full Range of NPort® Series Device Server Functions
The NPort® S8458 series supports the complete array of NPort® series device server functions. You can network your existing serial devices by connecting up to 4 serial devices through each of the 8 Ethernet ports, with only basic configuration required. In addition, data transmission between the serial and Ethernet interfaces is bidirectional.
Full-function Managed Ethernet Switch
The NPort® S8458 series has a built-in full-function managed Ethernet switch that supports QoS, IGMP-snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, and IEEE 802.1X, allowing you to handle virtually any kind of application. Ethernet redundancy, which is used to increase the reliability and availability of your industrial Ethernet network, is provided by Moxa’s own Turbo Ring and Turbo Chain technology (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D).
Ring Redundancy at the Device Level
Device level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The reliability of these communications depends on ring redundancy at the device level. which is designed to provide fast network fault detection and reconfiguration in order to support the most demanding control applications.
The NPort® S8458 series integrates a full function NPort® device server with an industrial switch to carry serial and Ethernet devices at the same time. In addition, the NPort® S8458 can also achieve ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Ring redundancy protocols. This all-in-one design can be used to optimize and simplify your device network, and enhance reliability.
Rugged Design with Complete Protection
The NPort® S8458 series complies with the UL60950-1 standard, which covers safety requirements for industrial control equipment.
Full Surge Protection
The NPort® S8458 series is equipped with surge protection for power, Ethernet interface, and serial interface to protect against voltage spikes.
Level 4 ESD
The NPort® S8458 series supports high level, 15 KV, ESD protection to prevent damage from static electricity.
Network Management Software
Industrial network management software with a license for 50 nodes (by IP address)