Moxa NPort 5450I w/ adapter
4 port device server, 10/100M Ethernet, RS-232/422/485, DB9 connectors, 15KV ESD, 12-48 VDC with 2KV isolation
Features and Benefits
- 10/100M auto-sensing Ethernet
- 4 serial ports, with support for RS-232, RS-422, and RS-485
- Built-in 15 KV ESD surge protection for all serial signals
- Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
- Choice of configuration methods: Web console, Telnet console, and Windows utility
- SNMP MIB-II for network management
- 2 KV isolation protection for NPort 5430I/5450I/5450I-T
- -40 to 75°C operationg temperature range (T model)
Network Readiness for up to Four Serial Devices
NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protect
your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
User-friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort® 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide temperature models.)
Dual DC Power Inputs
NPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power input gives users greater flexibility for use with different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.
Optional Power Supply
Universal AC (100 to 240V) Power Supply to 24VDC, Terminal Block
DIN Rail Mounting Kit 35mm, for DE-311/211, NPort 5200/5400, NPort W2250/2150
1 meter (39 inches) 35 mm Steel Din-Rail Track.
SKU: Din-Rail Track (39)
30 cm (12 inches) 35 mm Steel Din-Rail Track.
SKU: Din-Rail Track (12)
Din Rail Power Supplies
40W/1.7A DIN-Rail 24V VDC power supply with universal 85 to 264 VAC input: -20~70℃
60W/2.5A DIN-Rail 24V VDC power supply with universal 85 to 264 VAC input: -20~70℃
75W/3.2A, 24 VDC, with universal 85 to 264 VAC input
45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature
120W/5A, 24 VDC, with 88 to 132 VAC/176 to 264 VAC input by switch
DB9 Female to Terminal Block
SKU: Mini DB9F-to-TB
Wiring Terminal DIN Rail Terminal Block to DB25 male connector