Recently added item(s) ×

You have no items in your shopping cart.

Moxa DA-LN04-RJ

4 10/100 Mbps LAN Port Module for DA-682

Brand: Moxa

Mfg P/N: DA-LN04-RJ

Price: $139.00 & Free Shipping

Qty:

Features

Features and Benefits

  • IRIG-B time-synchronization module
  • Universal PCI expansion module
  • 4-port 10/100 Mbps LAN module
  • 4-port 100 Mbps Fiber LAN module
  • 8-port 10/100 Mbps unmanaged switch module
  • 8-port RS-422/485 serial module with terminal block connectors
  • 8-port RS-232/422/485 software-selectable serial modules with isolation protection
  • Fully compatible with Moxa embedded computers that have peripheral expansion slots

Overview

Moxa’s peripheral expansion modules, which come with serial ports, LAN ports, switch ports, fiber ports, time-synchronization IRIG-B ports, and PCI slots, give end-users the greatest flexibility for setting up industrial applications and are fully compatible with Moxa’s embedded computers that have perpheral expansion slots.
The serial port modules include an 8-port RS-232/422/485 module with either DB9 or terminal block connectors, and an 8-port RS- 422/485 module with terminal block connectors. Some modules are even designed with 2 kV digital isolation, making them fully suitable for the great demands of industrial applications that use serial communication. In addition, a 4-port LAN module, 8-port switch module, and 4-port fiber LAN module are available for setting up industrial communication applications with Ethernet-based devices. A universal PCI development kit is also available for PCI-based devices for expanding industrial applications at a reasonable cost.
The time-synchronization module features 3 digital inputs and 4 digital outputs and provides precision timing information using IRIG-B input signals. The module is designed for embedded computers that support the PCI/104 interface.
All modules are designed to offer the greatest flexibility for setting up applications and performing industrial tasks. In particular, users can swap out modules quickly and easily.

Specifications
DA-LN04-RJ Hardware Specifications
Ethernet Interface
LAN 8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45)
Magnetic Isolation Protection 1.5 kV built-in
Physical Characteristics
Weight 245 g (0.54 lb)
Dimensions 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)
MTBF (mean time between failures) 1,753,143 hrs
DA-SW08-RJ Hardware Specifications
DA-UPCI-DK Hardware Specifications
Universal PCI Expansion Adatper
PCI Slots 1
Interface Bus 32-bit Universal PCI (3.3 V and 5 V)
DA-FX04-MM-ST-T Hardware Specifications
Fiber Interface
Number of Ports 4 (100BaseFX)
Fiber Mode Multi-mode
Connector Type ST
Optical Wavelength 0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)
Min-TX Output -20 dBm
Max-TX Output -14 dBm
RX Sensitivity -34 dBm
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Standards and Certifications
EMC CE, FCC
EMI EN 55032, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A
EMS IEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV
IEC 61000-4-3 RS: 10 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Signal 4 kV
IEC 61000-4-5 Surge: Signal 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Green Product RoHS, CRoHS, WEEE
Software Functions
IEEE 1588 or IP Teaming Selectable (Default =IP Teaming) Supports 4 modes
AFT Adapter Failover Teaming
SFT Switch Fault Tolerance
ALB Adapter Failover and Load Balancing
Link Aggregation supported
DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications
Hardware
Communication Controller FPGA Cyclone V
Form Factor PCI/104
Time Code Input
IRIG-B Based on the IRIG STANDARD 200-04 and IEEE 1344
Precision and Accuracy
Accuracy (Time Synchronization) ±1 µs
Accuracy (Free Running) ±500 ms @ 24 hr
Input Signals
Single Level • Open: High
• Short to GND:> Low
• Level Input: 5 to 12 V
Differential Level • D+ - D- > 0.2 V, RXD is High
• D+ - D- < -0.2 V, RXD is Low
• Level Input: 5 V
Interface
IRIG-B 2-pin wafer to DB9
DI/DO 10-pin wafter to DB9
Protection
ESD Protection 8 kV contact, 15 kV Air ESD protection
Surge Protection 2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform
Insulation 500 V
Digital Input
Input Channels 3, source type
Input Voltage 0 to 30 VDC
Digital Input Levels for Dry Contacts • Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts • Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (source to DI)
Isolation 3 kV optical isolation
Connector Type DB9 male
Digital Output
Output Channels 4, sink type
Output Current Max. 200 mA per channel
On-state Voltage 24 VDC nominal, open collector to 30 V
Isolation 3 kV optical isolation
Connector Type Male
Operating Systems
Windows Windows 7E
Linux Debian 7
DA-SP08-DB DA-SP08-I-DB DA-SP08-I-TB Hardware Specifications
Serial Interface
Serial Standards 8 RS-422/485 ports, software selectable (DB9 male or terminal block connector)
ESD Protection 15 kV for all signals
Isolation 2 kV digital isolation
Insulation 500 V
Isolation 2 kV digital isolation
Pull low/high 1k/150k, jumper selectable
Termination Resistor 120 ohms, jumper selectable
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)
Serial Signals
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
RS-485-2w Data+, Data-, GND
DA-SP08-I-EMC4-DB TB Hardware Specifications
DA-SP38-I-TB Hardware Specifications