ET-6060D

The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.
The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25°C ~ +75°C.

• Each ET-6000 module has a built - in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser.

• The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.

• An Account and password is needed when logging into the ET-6000 web server.

• An IP address filter is included; which can be used to allow or deny connections from specific IP addresses.

• The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software

• The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI.

• The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability

• An LED indicator is used for each DI or DO channel

• All Digital Output modules provide :

Power on value (On boot up, the DO status is set to the Power-on value)

Safe value (If Modbus/TCP communication is lost for a specified period,the DO status is set to the safe value)

• All Digital Input modules provide :

High/Low latched status

DI channels can also be used as DI status and 16-bit low speed (100Hz) counters

• The various I/O components are mixed with multiple channels in a single module

• Provides the most cost effective I/O usage and enhances performance of the I/O operations

• Potect the hardware from damage caused by noise and surges

• Designed with isolation circuits for Ethernet, I/O and Power

• All configuration settings can be saved to the EEPROM on the ET6000

• EEPROM is mounted on a daughter board (called the “portable” board

• The settings can stored and easily backed up and moved

• Dual Watchdog consists of a Module Watchdog and a Host Watchdog

• Module Watchdog is a built-in hardware circuit

• Can be used to monitor the operation of the module

• Will reset the CPU module if a failure occurs in either the hardware or the software

• Host Watchdog is a software function

• Can be used to monitor the operating status of the host

• Is used to prevent network communication problems or host failures

• RJ-45 port supports automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables

• The ET-6000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case

• Allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C

• This function is used to create a DI to DO pair through the Ethernet

• Once the configuration is complete, the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background